optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 1 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. ordering information part number package style sensor photologic? aperture emitter / sensor slot width / depth lead length / spacing opb615 10k pull-up none 0.150" / 0.240? 0.100" (min) / 0.275" opb616 open collector opb617 inv-10k pull-up opb618 inv-open collector opb625 10k pull-up none 0.190" / 0.285? 0.100" (min) / 0.320" opb626 open collector opb627 inv-10k pull-up opb628 inv-open collector opb665n 10k pull-up 0.05?/ 0.01? 0.125" / 0.345? opb666n open collector opb667n inv-10k pull-up OPB668N inv-open collector opb665t t 10k pull-up opb666t open collector opb667t inv-10k pull-up opb668t inv-open collector n features: ? non-contact switching ? pcboard mounting ? enhanced signal to noise ratio ? choice of four logical output options product photo here description: each opb615 , opb625 and opb665 series slotted optical switch consists of an 890 nm, infrared light emitting diode (led) and a monolithic integrated circuit that in corporates a photodiode, a linear amplifier and a schmitt trigger on a single silicon chip. opb665 offers two mounting options -- no tabs (n) or two tabs (t). all devices in this series exhibit performance over supply voltages ranging from 4.5 v to 16.0 v, and may be specified as buffered or inverted with 10 kw pull-up or open collector output. devices are also tti/lsttl compatible and can drive up to 10 ttl loads. custom electrical, wire and cabling and connectors are ava ilable. contact your local representative or optek for more information. applications: ? mechanical switch replacement ? speed indication (tachometer) ? mechanical limit indication ? edge sensing rohs
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 2 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb 616/626/666n buffered open-collector opb618/628/668n inverted open-collector opb615/625/665n buffered 10k pull-up opb617/627/667n inverted 10k pull-up opb615, opb616, opb617, opb618 pin color/ number description 1 anode 2 cathode 3 vcc 4 output 5 ground dimensions are in: inches [ millimeters]
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 3 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb625, opb626, opb627, opb628 opb665, opb666, opb667, opb668 (n and t) pin color/ number description 1 anode 2 cathode 3 vcc 4 output 5 ground dimensions are in: inches [ millimeters] pin color/ number description 1 anode 2 cathode 3 vcc 4 output 5 ground
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 4 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions input diode v f forward voltage - - 1.6 v i f = 10 ma i r reverse current - - 100 a v r = 3 v v cc operating dc supply voltage 4.5 - 16 v i f(+) led positive-going opb615-618 threshold current opb625-628 opb665-668 0.1 0.1 0.1 0.55 0.6 1.6 3 3 10 ma v cc = 5 v i f(+) /i f(-) hysteresis 1.05 1.20 1.90 v cc = 5 v output photologic? sensor absolute maximum ratings (t a =25c unless otherwise noted) storage & operating temperature range -40 c to +100 c lead soldering temperatur e (1/16 inch (1.6mm) from the case for 5 sec. with soldering iron) (1) 260 c input diode forward dc current 50 ma peak forward current (1 s pulse width, 300 pps) 3 a reverse dc voltage 3 v power dissipation (2) 100 mw output photologic? supply voltage, v cc 18 v duration of output short to v cc 1 second voltage at output (5) vcc low level output current (sinking) 16 ma power dissipation (3) 240 mw notes: (1) rma flux is recommended. duration can be exten ded to 10 seconds maximum when flow soldering. (2) derate linearly 1.33 mw/ c above 25 c. (3) derate linearly 2.50 mw/ c above 25 c. (4) normal application would be with li ght source blocked, simulated by i f = 0 ma. (5) open collector devices = 30 volts
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 5 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions output photologic? sensor high level supply current: buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 - - 5 5 12 12 ma no load on output (3) inverted, 10k pull-up opb617, 627, 667 inverted, open-collect or opb618, 628, 668 - - 4 4 12 12 ma no load on output i f = 0 ma i ccl low level supply current: buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 - - 5.5 4.0 12 12 ma no load on output i f = 0 ma inverted, 10k pull-up opb617, 627, 667 inverted, open-collect or opb618, 628, 668 - - 6.5 5.0 12 12 ma no load on output (3) v oh high level output voltage: buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 v cc -1.5 - - - - v i oh = 100 a (3) inverter, 10k pull-up opb617, 627, 667 inverter, open-collector opb618, 628, 668 v cc -1.5 - - - - v i oh = 100 a (1) i f = 0 ma i oh high level output voltage: buffer, open-collector opb616, 626, 666 - - 100 a v oh = 30 v (3) inverter, open-collector opb618, 628, 668 - - 100 a i f = 0 ma, v oh = 30 v (1) v ol low level output voltage: buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 - - 0.4 v i ol = 16 ma, vcc = 4.5 v (3)(1) inverter, 10k pull-up opb617, 627, 667 inverter, open-collector opb618, 628, 668 - - 0.4 v i ol = 16 ma, i f = 0 ma t r , t f output rise time, output fall time 30 ns f = 10 khz, r l = 300 ? , dc = 50% (3) t plh propagation delay, low-high buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 0.6 s inverter, 10k pull-up opb617, 627, 667 inverter, open-collector opb618, 628, 668 3.0 s t phl propagation delay, high-low buffer, 10k pull-up opb615, 625, 665 buffer, open-collector opb616, 626, 666 3.0 s inverter, 10k pull-up opb617, 627, 667 inverter, open-collector opb618, 628, 668 0.6 s data rate - 100 - khz r l = 300 ? , dc = 50% (4) i cch notes: (1) normal application would be with li ght source blocked, simulated by i f = 0 ma. (2) v oh = v cc -1.5v for v cc = 4.5 to 16 volts. (3) i f = 5 ma opb615 to opb628; i f = 10 ma opb665 to opb668 (4) i f = 0 to 5 ma opb615 to opb628; i f = 0 to 10 ma opb665 to opb668
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 6 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb615 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb615 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb615 - flag next to emitter 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back emitter sensor left to right right to left 0 width top to bottom 0
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 7 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb625 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb625 - flag next to sensor 0 0.2 0.4 0.6 0.8 1 1.2 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb625 - flag next to emitter 0 0.2 0.4 0.6 0.8 1 1.2 0.00 0.05 0.10 0.15 0.20 0.25 displacement distance (inches) logic bottom to top top to bottom left to right right to left back right to left left to right back emitter sensor left to right right to left 0 width top to bottom 0
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.2 04/09 page 8 of 8 photologic? slotted optical switch opb615, opb616, opb617, opb618 series opb625, opb626, opb627, opb628 series opb665, opb666, opb667, opb668 (n and t series) optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. opb665 - flag in middle of slot 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb665 - flag next to sensor 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back opb665 - flag next to emitter 0.00 0.20 0.40 0.60 0.80 1.00 1.20 0.000'' 0.050'' 0.100'' 0.150'' 0.200'' 0.250'' displacement(inches) logic bottom to top top to bottom left to right right to left back right to left left to right back emitter sensor left to right right to left 0 width top to bottom 0
|
